Dingli energy-saving and environmentally friendly pasture dryer can reduce the moisture content of pasture from 45-75% to 14-18%, and can be adjusted flexibly, suitable for elephant grass, alfalfa grass, foxtail grass, wheat straw, barley straw, oat straw, rye Drying forage and feed such as straw, straw, sorghum straw, corn straw, potato vines, and bean stalks is specialized in the production of high yield and low consumption, environmental protection and high efficiency, and takes up less land.

Features of pasture dryer

1. The moisture content of the pasture can be quickly dried from 45-75% to 14-18% at one time, and the temperature of the pasture is always lower than 50 °C. The dry pasture completely retains the nutrients of the pasture, with bright color and fragrant smell;

2. Four-wheel drive is adopted, the transmission is more stable, the performance is stable, safe and reliable, the maintenance frequency is low, the processing capacity is large, the drying capacity is strong, the manpower input is small, and the operation is simple;

3. Advanced structure, high drying efficiency, energy saving and consumption reduction, high heat utilization rate: double drying of the middle and outer cylinders, more sufficient heat exchange, and graded drying of materials, more sufficient heating of materials, and increased thermal efficiency by 30%-40%

4. The thermal efficiency of the self-insulation of the cylinder is as high as 70% or more (the thermal efficiency of the traditional single-cylinder dryer is only 35%), and the thermal efficiency is increased by more than 30%. Civil construction investment is reduced by about 50%;

5. Improve the traditional heating technology, improve the cleanliness of hot air, and improve the color and cleanliness of drying materials: improve the furnace structure to ensure full combustion of fuel, set up a settling chamber to reduce the speed of hot air supply, purify the powder ash content in the hot air, improve and ensure Material drying color;

If you need grass drying equipment, please contact us.