When using cassava dregs drying equipment, the choice of equipment is very important, but safety is the most important thing, so the inspection work before using the cassava dregs dryer must be done in place, which not only guarantees The safety of the entire production, and at the same time avoid the following details to cause low efficiency of the entire drying process, the following will introduce some details of the inspection work.

First of all, check all parts, check all auxiliary equipment, including each transmission part of the dryer, support and drag parts, etc., should be fastened and whether they are normal, etc. touch. Check the sealing condition (the discharge manhole door is closed, the seal is good, the feed seal is worn, the discharge air lock valve moves flexibly, and the air lock is better), etc. In this production line, it should be checked whether the feeding device, combustion chamber, slag in the furnace pit, furnace door, air duct, regulating valve, blower, dust collector and other accessories are in good condition, whether the connection with the upper and lower processes is normal, etc., and the fuel inspection , Prepare the raw materials and check the hot blast stove. To ensure that the entire production line can run.

The cassava dregs dryer is mainly used for drying materials such as cassava dregs and starch dregs. The models of Dingli cassava dregs dryers selected by enterprises are also different because of the different output. Normal use plays an important role.