The maintenance of the machine is an extremely important and regular work. It should be closely coordinated with the operation and maintenance of the machine, and there should be full-time personnel on duty for inspection.

1. When the dryer is transported by the manufacturer to your production site, you must first conduct a routine inspection of the dryer to check whether it is the type of machine you purchased and whether it is damaged or unusable during transportation. If there is a problem, you should take pictures immediately and contact the manufacturer.

2. Before the dryer, you should determine the installation location of the dryer. The selection of the installation location of the dryer should consider the location of the transportation channel, raw material turnover, water inlet, steam inlet and sewer pipes. Here we remind you that the dryer should be installed in the same location as Dehydrator, dryer and other equipment together to reduce the distance between these equipment, to prevent subsequent troubles caused by improper location selection.

3. The dryer is one of the larger and heavier drying equipment, so the machine should be installed on a solid foundation, and at the same time, it must be kept level to prevent it from being caused by improper site selection and uneven foundation at the installation location. There is a large vibration when the equipment is working, which will affect the drying efficiency and the service life of the dryer.

If you want to know more about the sand dryer, please consult us, 24 hours online!