Biomass charcoal has a wide range of uses, such as replacing traditional coal as fuel, not only clean energy, but generally biomass is renewable, processing biochar with agricultural and forestry waste and other biomass can not only solve the problem of waste Biochar can be obtained at the same time. In addition to being used as a fuel, it can also be used as a soil conditioner, and biochar can be used to process carbon-based fertilizers, etc.

Generally, we can use straw, branches, etc. to process biomass charcoal. The carbonization step of the biomass carbonization furnace is to crush the straw first, and then if the moisture is relatively large, it needs to be equipped with a dryer, which is first dried and then carbonized, and then the output The most important thing is straw toner, and it can also be used with a briquetting machine to produce carbon rods.

Biomass carbonization furnace is a continuous process, continuous feeding and continuous carbonization, 24-hour operation, the raw material is not pre-loaded into the furnace, but the carbonization furnace is preheated to the carbonization temperature, and then the equipment starts to start. In the process of feeding and straw entering the carbonization furnace, it is necessary to ensure the sealing of the feeding port and the anaerobic carbonization in the main furnace, so the raw materials should not be too large, so the branches and straws need to be crushed. The size generally requires less than 2 cm.

If you want to know more carbonization production process, you can contact us at any time.