Beet dregs are waste residues produced during sugar beet processing. This material contains certain nutritional value and can be dried and made into feed. However, the moisture content of sugar beet dregs is relatively large. How to deal with beet dregs with relatively high humidity? Moisture can be quickly reduced by using a beet pulp dewatering dryer and then processed into feed.

Beet Residue Dehydration Dryer

Zhengzhou Dingli is a manufacturer of feed dryer equipment. At present, it has launched a new type of beet residue dehydration and drying equipment based on the characteristics of beet residue and other materials. The equipment can meet the daily processing needs of more than 20 tons. The beet residue with large moisture is processed by Dingli beet residue dehydration equipment. After that, it enters the Dingli beet residue dryer through the conveying equipment. The beet residue enters the inner layer of the rotary drum from the feeding device to realize downstream drying. The beet residue moves to the other end of the inner layer and enters the middle layer for countercurrent drying. In the middle layer, the beet dregs are continuously and repeatedly raised, in a way of two steps forward and one step back. The beet dregs travel to the other end of the middle layer and fall into the outer layer, and the beet dregs travel in a rectangular multi-loop way in the outer drum to achieve the drying effect. Under the action of hot air, the beet dregs of the slag quickly travel and discharge from the drum, and the wet beet dregs that have not reached the drying effect cannot travel quickly due to its own weight.

After being processed by Dingli beet residue dehydration dryer, the moisture of beet residue begins to decrease, and it can be used as feed raw material.