Improper maintenance method will also damage the life of the brewer's grain dryer. The following is the maintenance method of the brewer's grain dryer introduced to the majority of users:

1. The dryer must clean the toner on the gas stove every week to prevent it from being sucked into the cylinder and polluting materials:

2. The bearing seat of the dryer must be buttered every month to ensure the lubricity of the bearing;

3. Regularly remove the cotton residue on the temperature sensing rod of the dryer. When it is found that the temperature difference between the temperature regulator and the thermometer is too large, generally about +5 degrees, one may be that the temperature sensing rod is not placed properly, and the other may be the temperature sensing rod. cotton on stick

4. After the operation of the brewer's grain dryer is completed, please turn the temperature adjustment knob to the position of 0 degrees to reduce improper startup and prolong the life of the solenoid valve;

5. The cotton filter must be cleaned before using the dryer every day. If the filter is blocked, the air volume will be reduced, which will cause slow drying and dry drying, and waste energy;

6. The exhaust pipe and elbow of the dryer must be cleaned once a month. If it is not cleaned, the drying time will be prolonged, and too much lint will be blocked, which will easily cause fire;

7. The setting of drying temperature should be set correctly according to the drying conditions of the material itself;

8. When drying materials, the dryer should be preheated to 80 degrees, then turn off the gas, and blow cold air for 20 minutes.

The above 8 items can prolong the life of your brewer's grain dryer.