Cassava leaves can be chopped and fed directly to livestock, or can be dried and pelletized to be used as feed. In order to prolong the storage period of forage and promote the increase of livestock feed intake, Dingli Forage Dryer can be used for drying and preservation.

Forage drying equipment generally adopts the drum type, which is low in cost, simple in operation, large in output and good in drying efficiency. It mainly uses low-temperature hot air rapid drying technology for drying and dehydration. The heat exchange between the heated air and the wet green fodder can be realized in a co-current or counter-current situation. The wet green fodder is fed into the feeding end of the forage drying equipment through the feeding tissue. Under the combined action, a uniform material curtain is formed through the material plate, and the heated air is fully contacted with the material curtain to achieve sufficient heat exchange. Finally, a dust removal device is introduced in the discharge area, and it is discharged into the atmosphere after purification. Heat exchange is the key link of forage drying equipment. It requires multiple factors such as material curtain, hot air volume, wind speed, temperature, internal layout of drying area and equipment passing rate to work together to improve heat utilization and ensure drying. quality.

The gas flow is as follows: the forage dryer is equipped with an indirect clean hot blast stove. The clean air is pressurized by the blower and enters the heat exchanger for heating, and the temperature reaches 150-350 °C. Evaporate the water, reduce the temperature to 35-55 ℃ and discharge it out of the dryer, and the dust-laden moisture is purified and discharged to the standard through the dust collector.

Want to know more, welcome to inquire!