Flash dryers are versatile and can dry okara. The spin flash dryer can be used for drying wet materials and paste materials with high water content in various industries such as dyes, pigments, chemicals, pesticides, fertilizers, feed, food, medicine, electronics, etc., but the premise is that the state of the materials after drying should be powder.

The working principle of the flash dryer: The cyclone flash dryer is composed of key components such as drying host, feeder, heat source device (hot blast stove or steam), air filter, blower, cyclone, bag filter, and induced draft fan. The hot air enters the bottom of the dryer tangentially, and forms a powerful rotating wind field driven by the agitator. The paste material enters the dryer from the screw feeder. Under the strong action of the high-speed rotating stirring paddle, the material is dispersed under the action of impact, friction and shearing force, and the block material is quickly crushed, fully contacted with hot air and heated ,dry. The dehydrated dry material rises with the hot air flow, and the large particles are intercepted by the classification ring, and the small particles are discharged from the center of the ring to the outside of the dryer and recovered by the cyclone separator and dust collector. , fall back to the bottom to be crushed and dried.